 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Aluminum Electrolytic Capacitors/ FR Radial Lead Type Series: FR Type: A Country of origin Malaysia Features Low ESR (Same as FM Series) Endurance : 2000 h to 10000 h at +105 C RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan -40 C to +105 C 6.3 V.DC to 50 V.DC 22 F to 8200 F 20 % (120 Hz/+20 C) I < 0.01 CV (A) After 2 minutes W.V. 6.3 10 16 25 35 50 tan 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 F for products of 1000 F or more. (120 Hz/+20 C) Endurance After following life test with DC voltage and +105 C2 C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 5 11/ 6.3 11.2 : 2000 hours, 8 11.5/ 10 12.5 : 6000 hours 8 15/ 10 16 : 8000 hours, 8x20 : 9000 hours 10 20 to 10 25/ 12.5 20 to 12.5 35/ 16 20 to 16 25 : 10000 hours Capacitance change 25 % of initial measured value (6.3 V to 10 V : 30 %) tan < 200 % of initial specified value DC leakage current < initial specified value Shelf Life After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current W.V.(V.DC) 22 6.3 to 50 47 390 1200 Cap (F) to to to to 33 330 1000 8200 Frequency (Hz) 60 0.45 0.60 0.65 0.75 120 0.55 0.70 0.75 0.80 1k 0.75 0.85 0.90 0.95 10 k 0.90 0.95 0.98 1.00 100 k 1.00 1.00 1.00 1.00 Dimensions in mm (not to scale) Sleeve Pressure relief 6.3< d0.05 <8 10< [mm] + - F0.5 L 14 min. 3 min. D0.5 D0.5 L<16 : L1.5 L>20 : L2.0 (mm) Body Dia. D Body Length L Lead Dia. d Lead space F 5 -- 0.5 2.0 6.3 -- 0.5 2.5 8 -- 0.6 3.5 10 -- 0.6 5.0 0.6 12.5 12.5 to 25 5.0 30 to 35 0.8 16 -- 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Sep. 2010 - EE100 - Aluminum Electrolytic Capacitors/ FR Case size/Impedance/Ripple current W.V.(V.DC) Case size (D L) 5 6.3 8 8 8 10 10 10 10 12.5 12.5 12.5 12.5 16 16 11 11.2 11.5 15 20 12.5 16 20 25 20 25 30 35 20 25 6.3 V to 35 V Impedance ( /100 kHz) +20 C 0.300 0.130 0.056 0.041 0.030 0.043 0.028 0.020 0.018 0.018 0.015 0.013 0.012 0.017 0.014 -10 C 1.000 0.430 0.168 0.123 0.090 0.114 0.078 0.057 0.054 0.045 0.038 0.033 0.030 0.043 0.035 Ripple Current (mA r.m.s./100 kHz) +105 C 280 455 950 1240 1560 1290 1790 2180 2470 2600 3190 3630 3750 3300 3820 Impedance ( /100 kHz) +20 C 0.340 0.140 0.061 0.045 0.033 0.042 0.030 0.023 0.022 0.022 0.018 0.016 0.014 0.019 0.016 -10 C 1.130 0.460 0.183 0.135 0.099 0.126 0.090 0.069 0.066 0.055 0.045 0.040 0.035 0.048 0.040 50 V Ripple Current (mA r.m.s./100 kHz) +105 C 250 405 870 1140 1430 1170 1650 1890 2150 2260 2660 3160 3270 2870 3320 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Sep. 2010 - EE101 - Aluminum Electrolytic Capacitors/ FR Standard Products W.V. Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. Dia. (20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (F) (mm) (mm) (mA r.m.s.) ( ) (hours) (mm) (mm) (mm) (mm) 150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 330 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 820 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 1200 10 12.5 1290 0.043 6000 0.6 5.0 5.0 1500 8 20 1560 0.030 9000 0.6 3.5 5.0 1800 10 16 1790 0.028 8000 0.6 5.0 5.0 2200 10 20 2180 0.020 10000 0.6 5.0 5.0 2700 10 25 2470 0.018 10000 0.6 5.0 5.0 3900 12.5 20 2600 0.018 10000 0.6 5.0 5.0 4700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 5600 12.5 30 3630 0.013 10000 0.8 5.0 12.5 35 3750 0.012 10000 0.8 5.0 6800 16 20 3300 0.017 10000 0.8 7.5 7.5 8200 16 25 3820 0.014 10000 0.8 7.5 7.5 100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 220 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 680 8 11.5 950 0.056 6000 0.6 3.5 5.0 820 10 12.5 1290 0.043 6000 0.6 5.0 5.0 1000 8 15 1240 0.041 8000 0.6 3.5 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 1500 10 16 1790 0.028 8000 0.6 5.0 5.0 1800 10 20 2180 0.020 10000 0.6 5.0 5.0 2200 10 25 2470 0.018 10000 0.6 5.0 5.0 3300 12.5 20 2600 0.018 10000 0.6 5.0 5.0 3900 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 4700 16 20 3300 0.017 10000 0.8 7.5 7.5 5600 12.5 35 3750 0.012 10000 0.8 5.0 12.5 35 3750 0.012 10000 0.8 5.0 6800 16 25 3820 0.014 10000 0.8 7.5 7.5 68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 120 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 220 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 470 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 680 10 12.5 1290 0.043 6000 0.6 5.0 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 1000 10 16 1790 0.028 8000 0.6 5.0 5.0 10 20 2180 0.020 10000 0.6 5.0 5.0 1500 10 25 2470 0.018 10000 0.6 5.0 5.0 1800 10 25 2470 0.018 10000 0.6 5.0 5.0 2200 12.5 20 2600 0.018 10000 0.6 5.0 5.0 2700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 3300 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 3900 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 4700 16 25 3820 0.014 10000 0.8 7.5 7.5 5600 16 25 3820 0.014 10000 0.8 7.5 7.5 Case size Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 (pcs) 2000 2000 1000 1000 500 1000 500 500 500 500 500 (V) 6.3 10 16 EEUFR0J151( ) EEUFR0J331( ) EEUFR0J821( ) EEUFR0J122L( ) EEUFR0J122( ) EEUFR0J152L( ) EEUFR0J182( ) EEUFR0J222( ) EEUFR0J272L( ) EEUFR0J392( ) EEUFR0J472( ) EEUFR0J562L EEUFR0J682L EEUFR0J682S( ) EEUFR0J822( ) EEUFR1A101( ) EEUFR1A151( ) EEUFR1A221( ) EEUFR1A681( ) EEUFR1A821( ) EEUFR1A102L( ) EEUFR1A152L( ) EEUFR1A152( ) EEUFR1A182( ) EEUFR1A222L( ) EEUFR1A332( ) EEUFR1A392( ) EEUFR1A472L EEUFR1A472S( ) EEUFR1A562L EEUFR1A682L EEUFR1A682( ) EEUFR1C680( ) EEUFR1C101( ) EEUFR1C121( ) EEUFR1C221( ) EEUFR1C471( ) EEUFR1C681L( ) EEUFR1C681( ) EEUFR1C102L( ) EEUFR1C102( ) EEUFR1C152( ) EEUFR1C152L( ) EEUFR1C182L( ) EEUFR1C222( ) EEUFR1C272( ) EEUFR1C332L EEUFR1C332S( ) EEUFR1C392L EEUFR1C392S( ) EEUFR1C472L EEUFR1C472( ) EEUFR1C562( ) 250 250 2000 2000 2000 1000 500 1000 1000 500 500 500 500 500 250 250 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 500 250 250 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Dec. 2010 - EE102 - Aluminum Electrolytic Capacitors/ FR Standard Products W.V. Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. Dia. (20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (F) (mm) (mm) (mA r.m.s.) ( ) (hours) (mm) (mm) (mm) (mm) 47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 100 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 150 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 330 8 11.5 950 0.056 6000 0.6 3.5 5.0 390 8 15 1240 0.041 8000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 470 8 20 1560 0.030 9000 0.6 3.5 5.0 10 12.5 1290 0.043 6000 0.6 5.0 5.0 560 8 20 1560 0.030 9000 0.6 3.5 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 680 10 16 1790 0.028 8000 0.6 5.0 5.0 820 10 20 2180 0.020 10000 0.6 5.0 5.0 10 20 2180 0.020 10000 0.6 5.0 5.0 1000 10 25 2470 0.018 10000 0.6 5.0 5.0 1200 10 25 2470 0.018 10000 0.6 5.0 5.0 1500 12.5 20 2600 0.018 10000 0.6 5.0 5.0 1800 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 2200 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 2700 16 20 3300 0.017 10000 0.8 7.5 7.5 3300 16 25 3820 0.014 10000 0.8 7.5 7.5 33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 68 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 180 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 270 10 12.5 1290 0.043 6000 0.6 5.0 5.0 390 8 20 1560 0.030 9000 0.6 3.5 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 470 10 16 1790 0.028 8000 0.6 5.0 5.0 560 10 20 2180 0.020 10000 0.6 5.0 5.0 10 20 2180 0.020 10000 0.6 5.0 5.0 680 10 25 2470 0.018 10000 0.6 5.0 5.0 820 10 25 2470 0.018 10000 0.6 5.0 5.0 1000 12.5 20 2600 0.018 10000 0.6 5.0 5.0 1200 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 1500 16 20 3300 0.017 10000 0.8 7.5 7.5 1800 12.5 35 3750 0.012 10000 0.8 5.0 12.5 35 3750 0.012 10000 0.8 5.0 2200 16 25 3820 0.014 10000 0.8 7.5 7.5 22 5 11.5 250 0.340 2000 0.5 2.0 5.0 2.5 56 6.3 11.2 405 0.140 2000 0.5 2.5 5.0 2.5 100 8 11.5 870 0.061 6000 0.6 3.5 5.0 120 8 15 1140 0.045 8000 0.6 3.5 5.0 150 10 12.5 1170 0.042 6000 0.6 5.0 5.0 180 8 20 1430 0.033 9000 0.6 3.5 5.0 220 10 16 1650 0.030 8000 0.6 5.0 5.0 270 10 20 1890 0.023 10000 0.6 5.0 5.0 330 10 25 2150 0.022 10000 0.6 5.0 5.0 470 12.5 20 2260 0.022 10000 0.6 5.0 5.0 560 12.5 25 2660 0.018 10000 0.6 5.0 5.0 680 12.5 30 3160 0.016 10000 0.8 5.0 12.5 35 3270 0.014 10000 0.8 5.0 820 16 20 2870 0.019 10000 0.8 7.5 7.5 1000 16 25 3320 0.016 10000 0.8 7.5 7.5 Case size Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 (pcs) 2000 2000 2000 2000 1000 1000 1000 1000 500 1000 1000 500 500 500 500 500 500 500 250 250 250 2000 2000 1000 1000 500 1000 1000 500 500 500 500 500 500 500 250 (V) 25 35 50 EEUFR1E470( ) EEUFR1E680( ) EEUFR1E101( ) EEUFR1E151( ) EEUFR1E331( ) EEUFR1E391L( ) EEUFR1E471Y( ) EEUFR1E471L( ) EEUFR1E471( ) EEUFR1E561L( ) EEUFR1E681L( ) EEUFR1E681( ) EEUFR1E821( ) EEUFR1E102( ) EEUFR1E102L( ) EEUFR1E122L( ) EEUFR1E152( ) EEUFR1E182( ) EEUFR1E222L EEUFR1E222S( ) EEUFR1E272L EEUFR1E272S( ) EEUFR1E332( ) EEUFR1V330( ) EEUFR1V680( ) EEUFR1V181( ) EEUFR1V271L( ) EEUFR1V271( ) EEUFR1V391L( ) EEUFR1V471L( ) EEUFR1V471( ) EEUFR1V561( ) EEUFR1V681( ) EEUFR1V681L( ) EEUFR1V821L( ) EEUFR1V102( ) EEUFR1V122( ) EEUFR1V152L EEUFR1V152S( ) EEUFR1V182L EEUFR1V222L EEUFR1V222( ) EEUFR1H220( ) EEUFR1H560( ) EEUFR1H101( ) EEUFR1H121L( ) EEUFR1H151( ) EEUFR1H181L( ) EEUFR1H221( ) EEUFR1H271( ) EEUFR1H331L( ) EEUFR1H471( ) EEUFR1H561( ) EEUFR1H681L EEUFR1H821L EEUFR1H821S( ) EEUFR1H102( ) 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Dec. 2010 - EE103 - |
Price & Availability of EEUFR0J682L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |